Features

• This is a continuous type machine therefore production is greatly increased
• The automatic Belt Warping Prevention Device keeps both the upper and lower belts in the same position. Using the feedback system, damage is prevented. (Patent Pending)
• Using the electronic thermostat and the SSR, the temperature difference’s range is kept at ±3℃. The SSR’s electronic parts have no contact points making for durability.
• Various stackers can be used with this machine.
• This machine has a front conveyor belt which greatly increases production levels.
• The Rotary Strip Off Device can be attached as optional equipment.
• By pushing the heater control switch the temperature of the upper and lower or front and rear heater can be easily controlled. This means various materials can be used safely.
• The pressure roller is covered with a layer of silicon rubber. The upper and lower pressure rollers are completely separated when the pressure is set at 0.
• The heating plate is covered with special hard alumite, making it durable. The exchange of belts is very easy.
• The Belt Stopping Device stops the belt automatically if the belt warps therefore protecting the belt.
• The entrance of the feed in point can be adjusted easily according to the thickness of the material and interlining being used.
• An anti puckering roller is installed in this machine. This roller’s position can be adjusted.
• Wing tables can be attached to the work table. When these tables are not in use, they can be folded down. (Option)
• The pressure is easily adjusted.
• Depending on which of the optional tables is used, various shapes can be easily pressed.

Technical Specification