• Introduction
• Pin Table for woven fabric
• Pin Table for knitted fabric
• Other Productivity Tools Solutions

Veith Systems - Pin Table for woven fabric

Problem

• Matching of checks and stripes in the garment production has always been difficult and time consuming.
• Traditional methods tend to waste a lot of material, since the patterns are cut out with a blocking tolerance.
• The task of rearranging the blocked out patterns is tedious and expensive.
• The workers involved in this process have to be skilled.

• The patented VEITH SYSTEM PIN TABLE consists of a slotted aluminum top and Needle-Bars underneath.
• Each Needle-Bar has pins positioned inside the slots of the table top.
• The Needle-Bars can be moved freely along the length of the table. I.e. they can be positioned exactly according to the matching conditions of the marker.
• The height of the pins can be adjusted with the turn of a hand-wheel. So the spreading and pinning is convenient, fast and avoids tension in the lay package.
• Each pin can be individually locked down, i.e. only the needed quantity of pins have to be used.
• Each pin has a rounded top, which avoids damages to the fabric, i.e. with our special pins we can pin the fabric inside the piece area and produce the quality, where it is needed, and not outside in the waste region
• The PIN TABLE is an abstract copy of the marker.

• Improve your quality.
• Spread and match in one step.
• Reduce your relaying operations.
• Have lower fabric consumption.
• Do the fine cutting after spreading without relaying.
• Prepare your lay for CNC-Cutting.

• VEITH SYSTEM has an unique Know-How of more than 600 installations world wide.
• VEITH SYSTEM has developed a set of rules for generating special check- and stripe-type markers.
• A VEITH SYSTEM marker reduces the problems of variations in the repeat.
• With a VEITH SYSTEM marker it is possible to place different repeats in the same lay.
• With a VEITH SYSTEM marker it is possible to cut checks and stripes with a CNC-Cutter.
• VEITH SYSTEM offers training on site or in our studio.
• VEITH SYSTEM has recently released the new VEITH PinIT Software for the VEITH PIN TABLE. With PinIT it is now possible to plan markers according to the repeat of the fabric.

• Savings in labor time between 30% and 50%
• Depending on the product, average material savings are between 3% and 7%.
• This results in an average pay-back time of less than one year.
• The pay-back time of a CNC-cutter is reduced, because now it is possible to use it for checks and stripes as well.