Home / Mid Process / Ngai Shing Introduction
NS-81P Collar Trimming Turning and Blocking Machine
- Pneumatic operation
- Including trimming, turning and pressing of Collar
- Longer pressing length can press whole of the collar
- Automatic arm holding collar minimize human operation
- Equipped with collecting device to maximize efficiency
- With automatic thermostat, pressure regulator and pressing timer
- Productivity is about 1400 pcs per 8 hours
|
|
NS-93 Spot Welding Machine
- Pre-fix interlining with fabric in order to avoid move position during fusing
- Electric heat with automatic thermostat
- Maximum temperature 300°C
- With different heating nozzle
- String hanger facilitates operation
|
|
NS-95 Collar Heat Notcher
- Produce mark on collar for accurate attached on shirt body
- Adjustable heating temperature
- Easy adjustment of size between center and side notch
|
|
NS-92 Collar Contour Trimmer
- Cut bottom of collar, cuff and pocket flap etc.
- Give balance cut to the bottom of upper collar for a more accurate attached on collar band
- 10" adjustable cutting knife for different curve and straight line
- Bottom paper can be adjusted automatically to ensure perfect cutting result.
- Equipped with guilds for correct positioning
|
|
NS-9084 SN Pneumatic Pocket Creasing Machine(Single Head)
- Double press system - retractable die to press the top of pocket for a better result
- Lower mould can be adjustable for different size such as round, square, corner cut and rectangular shape
- "S" model equips with built-in steam system which is best for jeans and heavy fabric
- Basic model equips with variable thermostat and pressing timer
- Productivity is about 1400 pcs per 8 hours
|
|
NS-85P Automatic Cuff Blocking Machine
- Expandable mould can be formed according to the shape of cuff
- Pressing edge margin can facilitate top stitch
- Automatic arm holds the cuff to fix position
- Automatic stacking of cuff
- Productivity is about 2000 pcs per 8 hours
|
|
