Home / Apparel / Sewing / Juki Union Special, Inc.
2-needle, Needle-feed, Lockstitch Machine
The newly introduced LH-3100 series ensures both beautifully and consistently finished seams and a higher degree of ease of operation
LH-3128
LH-3128-7(with automatic thread trimmer)
The tension applied to the bobbin thread has been reduced and the needle thread path has been thoroughly renovated to achieve highly consistent feed of the needle thread. Puckering, stitch skipping, thread breakage and isolated idling loops can be therefore prevented, enabling the machine to produce beautifully finished seams with consistency.
After the gauge has been replaced, the machine can be adapted to the newly installed gauge only by adjusting the clearance provided between the blade point of the hook and the needle. In this case, it is not necessary to change the hook timing in accordance with the gauge. As a result, the length of time required to replace the gauge is dramatically reduced.
Options
Tension-free feeder (tape feeder) V059
(Part No.: MAV-059000AA)
The amount of tape to be fed can be adjusted in accordance with the sewing speed of the machine. It is adaptable to processes for attaching reinforcement tape, attaching elastic tape or lace to foundation.
Tape cutter AT-36
The tape cutter is able to cut the tape just behind the presser foot (20mm away from the needle entry point). The cutter pressure is adjustable according to the material thickness.
Automatic reverse feed kit (Part No.: 226-56854)
The automatic reverse feed function device can be mounted on the machine after the setup.
(*Synchronizer not included.)
Micro-lifter (Part No.: 236-11056)
This device can be installed on the back of the face plate. It is very convenient for frequent use.
Auto-lifter AK89
|
