Home / Electrical Systems
Electrical Systems - E-Line Busbar Energy Distribution Systems (KB)
E-Line KB Busbar Energy Dustribution Systems 800A...6000A
Where To Use:
Industrial Plants / Highrised Buildings / Textile Industry / Automotive Industry / Dockyards / Hotels / Shopping Centers / Transformer to Panel Connections and Panel to Panel Connections / Main Horizontal and Vertical Lines.
Specifications:
Modular construction / To be able to get energy trough the joint points and tap off points / High mechanical and electrical endurance / Compact Structure / «One Bolt construction» provides easy, fast and sequre installation / Tap off boxes providing great savings in the system cost / High dynamic and thermic shortcircuit capability / Special design which provides minimum voltage drop / Aluminyum or copper conductors upon request.
E-Line KB Compact busbar main specifications:
Standard modular structure and flexibility.
The nodular structure of E-Line KB can be adapted to the required architectural design easly. All necessary accessories are present as*.
The structure needs less place then the cable systems and all other systems. This system look modern and esthetic.
*In urgency required pieces can be produced in a short respond.
Easy mounting and One-Bolt security construction?
One-Bolt construction is used at the joint points of E-Line KB. The Belvile washers on both sides of the bolt* provides a fixed contact pressure in all kinds of heat conditions and prevents the bolt to be loosen. One-Bolt System provides also easy and fast mounting.
*The bolt is fixed with Torg key.
High shortcircuit capability
Because there isn't any support point on the compact structure moment effect doesn't accure. Due to this specification The shortcircuit capability of the E-Line KB is very high.
Heat dissipation advantages
Because There is no air in the compact structure so the heat which is occured on the conductors can easily be transferred to the environment through the housing.
Minimum voltage drop
Because the axis of the conductors are very close to each other the inductive reactions is very low by E-Line KB (Drawing-4). As the voltage drops of the compact system and air insulated system are compared the importance of this subject will be understood.
No need to use Firebarriers
Because there is no air inside of the housing there isn't "chimney effect" by the E-Line KB systems, therefore there is no need to use "fire barrier" inside of the busbar. During the fire, flame can't be propagated. Our system is halogen-free and doesn't generate poisoned gas.
|
